Understanding the Difference between SATA SSD and NVME SSD

Understanding the Difference between SATA SSD and NVME SSD

Discussing hard drive problems, of course you already know the SATA SSD which a few moments ago was favored because it has sufficient specifications. However, this is not the case now. The presence of NVME SSDs, with all their greatness, speed and sophistication, seems to get rid of the SATA SSD position. Now, more people talk about and choose NVME SSDs, which it is said, are superior to SATA SSDs and previous types.

Is it true that the NVME SSD has specifications that make it worthy of being ranked among the many other hard drives? Check out the following reviews!

What is an SSD?

Solid State Drive stands for SSD. This device is one part of the computer that is useful as a storage and boot media. SSDs work hand in hand with hard disks that have almost the same function as them. SSD is shaped like a memory chip that is usually found on a flash disk. Most people choose SSD based on the speed they have for smooth operation.
Get to know SATA SSDs

SATA, or serial ATA, is a solution to the problems faced by computer users in the 90s. This year, computers are cluttered with bad, annoying big data gray cables that block all airflow in the case. These cables are very annoying to work related to computers. What’s even worse is, the old ATA cables had a speed equivalent to a slug, aka very slow. Time seems to run very slowly when working with these ATA cables.

The years have changed, developments in a more advanced direction have occurred. In the 2000s, SATA was the answer to ATA’s poor performance in the previous year. SATA has a more robust and reliable speed when compared to the previous generation ATA. The cable that is owned by SATA does not cause problems when it comes to working with computers.

In the following years, SATA continued to experience development. Increasingly with years, the faster SATA has. If you talk about SATA at the moment, it is the newest version of the previous generation, with the speed that has been increased many times.

This increase in SATA speed allowed disk-based hard drives to go faster while paving the way for solid state to revolutionize hard drive speed in the following years.

Get to know NVME SSDs

NVME stands for Non-Volatile Memory Express. That said, this is the latest breakthrough in the SSD field as it is able to connect hard drives via the PCIe Port, which serves to build up speed with maximum data. This device has a type of memory similar to RAM, it’s just that the data in it won’t be erased when you turn off your computer or laptop.

So, it can be said that NVME is able to take advantage of the speed offered by PCIe. This has an effect on its performance which can transfer data several times faster than other SSDs. No wonder the sophistication offered makes it the new prima donna in the SSD field.
The difference between SATA SSD and NVME SSD

Talk about the difference between the two, of course, speed is an important point that must be taken into account. NVME does have a very high speed, but that does not mean it makes SATA SSD not have a high speed. In its time, SATA SSDs were indeed the fastest. But along with NVME, SATA has become even less superior.

NVME is predicted to have five times faster transfer speeds when compared to SATA SSDs. This means that NVME SSDs have 25 times the speed when compared to HDDs. Wow, of course this will make it easier for you to complete your daily work. This speed has been proven correctly by carrying out the trial process. This speed can also be used by anyone, without any conditions to get maximum speed.

NVME SSDs are also able to accommodate and process more commands or commands when compared to other ordinary SATA SSDs and SSDs. If an ordinary SATA SSD can only accommodate 32 commands in one queue, then NVME can accommodate and process 64 thousand commands in one queue. In fact, NVME can accommodate 64 thousand queues at one time. When compared, of course, NVME SSDs are far superior to SATA SSDs.

The advantage of NVME SSDs is that they can accommodate 64 thousand queuing commands at one time, coupled with the ability to manage these queues. Good queue management of NVME SSDs, able to keep commands in order. NVME SSDs also have powerful features that can prioritize which orders should be processed first. One more thing that is astonishing about NVME SSD; its ability to accept multiple commands from more than one processor core.

Comparison of the disadvantages of SATA SSD and NVME SSD

Excellence in speed does not make NVME SSDs superior and gapless. This SSD also still has its weaknesses. Here’s a list of comparisons with SATA SSDs:

Weaknesses of SATA SSDs Weaknesses of NVME SSDs The speed cannot be excelled when compared to NVME which has support from PCIe. Heats up faster when working, when compared to SATA SSD. This is also influenced by the work power and high NVME speed. For display problems, the SATA SSD uses a green PCB which looks less attractive and cool. To deal with the hot temperatures that arise when the NVME SSD is working, an optimal casing and motherboard cooler is needed (NVME needs an additional fan or heatsink).

Leaving one motherboard SATA slot that is inactive when using an M.2 SATA SSD. This of course reduces the value of efficiency. Because NVME has the power to connect hard drives via PCIe ports, this device requires a special motherboard that supports M.2 connectors with PCIe x4 or at least x2.

In conclusion, the main difference between the SATA SSD and NVME SSD is the speed, ability to process commands in a single queue, and the sophistication offered. But, even though it looks superior, NVME SSDs have weaknesses that are the advantages of SATA SSDs. If asked which one is better, both are equally good and good, as long as it suits the user’s needs. Happy determining!